How to Repair a Saab 93 Key Fob

There's a good chance that the key fob of your Saab 9-3 is faulty with its electronic chip. The metal part of the classic car keys was easy to duplicate, however, modern keys have an immobilizer system to protect your vehicle.

The first step in determining the reason your key fob isn't working is to replace the battery on your key fob. This is a low-cost and simple fix.

How do you program the saab keys replacement 93 Key Fob

saab 9-3 key not accepted contact service 93 keys allow you to control the trunk, doors and engine of your vehicle. They can also unlock the fuel door of your car and panic buttons. They can be programmed by synchronizing them with the transmitter in your vehicle. Place the key into the ignition and turn the switch to ON. Follow the instructions on the Tech2 until you have programmed all the keys you want to function with the vehicle.

New Saabs had two keys, whereas older models usually have only one. You can get a new key by re-installing the transmitter, which includes the transponder, and programming it with an instrument that's handheld called a Tech-2. This can be done at your Saab dealership. In order to make it work you'll need to have a matching key. This can be expensive however, it's less costly than replacing the entire CIM system and locking cylinders if you have lost your sole working key.

Saab key fob replacement 93

Saab owners who have lost their keys should get an additional one as quickly as they can. The key fob is not like the classic metal keys used in cars a few years ago. It is an electronic device that communicates with the car via a unique chip. This is how the car detects the key fob and stops it from being copied. Dealers are able to do this however it could be expensive. It is better to avoid this issue by purchasing an alternative Saab key from an online retailer.

The main reason you should have an extra key is to make your car safer if you ever lose it. A spare key is more likely to be discovered by a burglar than the stolen one. This is because the majority of thieves do not have the tools to duplicate these kinds of keys. They would need a specialized device to copy keys but that's not a guarantee for protecting your car from theft.

A spare key can save you money in the process of replacing the SAAB 9-3 remote's battery. All electronic units within the keyfob have batteries, and eventually, they will fail. Changing the battery is relatively easy, but you must be cautious not to damage the electronics in the case. You are able to learn how to accomplish this task by watching YouTube videos including those created by Cyclone Cyd.

Saab 93 key fob battery

It's probably time to replace the battery in your key fob If you've noticed the response time is slow. While there could be other causes for the delay an unresponsive battery is the most likely culprit. It's a simple and inexpensive fix, so don't put off doing it.

To remove the backup key, first remove the fob. To accomplish this, press firmly on the Saab Logo and pull it off the key loop. Insert a flathead phillips screwdriver into the indentation on the key fob case. Twist the screwdriver to separate the case. The plastic shouldn't be damaged if you don't apply excessive force.

When the case is opened it is possible to view the electronic components inside. The circuit board is attached by metal retaining clips. If they are dirty or worn out, the fob won't perform as it should. It is possible to clean the fobs by rubbing alcohol. It's important to note that this is only a temporary fix. The clips will eventually wear down and require to be replaced.

Test the door locks of your car using your backup remote before you replace the battery. If the backup remote works it's likely to be with your main key fob. Replacing the battery will resolve the issue, but if you're experiencing delays every time you lock or unlock your doors, it's a sign that something else is wrong with the car.

Saab key fob case with 93 keys

A replacement case can be bought If your key fob appears worn-out. They are available online and can be attached to the remote control you already have. All you need is a flathead screwdriver and a bit of patience. Just insert the screwdriver into the slot that is located in the middle of the battery and gently move it around until it splits. Be careful not to scratch the limiters which hold the battery. The new case can be inserted into the existing electronics after removing the emergency badge and key. It won't require any programming.

The top key fob cover features a lining specifically designed to stops signals from reaching the key fob. This is important, because it's the signals that enable your vehicle to start. Some of these cases have silver layers, while others are made from copper to distort transmissions better.

A key fob cover is also an excellent way to safeguard your keys from damage. It will aid you in keeping track of your keys, and will also help you find them in the dark when you're driving to your car. A quality key fob case will keep your keys protected from theft, and it will also add a touch of style to your keychain.