Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions against theft by using the Ghost Immobiliser. This system is discrete and doesn't require additional key fobs.

The device uses buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin sequence that can be altered up to 20 times. This will then allow the vehicle to start.

Simple PIN code change process

Many owners are upgrading their security due to the rising number of vehicle thefts. There are a variety of aftermarket security devices available including tracking systems, alarms and immobilisers. Not all of them are equally effective in protecting your car. While a tracking device can help you find your car in the event of theft, it can not prevent the crime from happening in the first instance. An immobiliser, on other hand does exactly what it says on the tin: it disables the engine of your vehicle so that it is unable to be started. The autowatch ghost immobiliser fitting Ghost immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to take your car.

Utilizing the buttons already in your car, the ghost device creates an unique sequence that must be entered prior to the engine can start. This can be done using the window, heater or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, Ghost Immobiliser Problems which allows the driver to operate their vehicle without the button sequence. This feature is particularly beneficial if you have to surrender your car for valet parking or maintenance, as the immobiliser will remain activated, but not disabled.

The Ghost is a unique and ingenious device that is used in conjunction with the buttons of your car rather than as a separate unit. It is not only an effective deterrent to vehicle theft however, it can also be used on any future vehicles you own. This makes it a more cost-effective option than a traditional wheel lock.

Weatherproof small device

The Autowatch ghost Immobiliser problems immobiliser is an advanced security system that guards your pride and joy against key cloning, hacking & ECU swapping. It is a tiny weatherproof device that connects with the ECU of your vehicle directly via the CAN bus to disable the motor. It can be placed in the vehicle without the need for extra wiring, and has been thoroughly tested to ensure that it is compatible with all vehicles. It also is resistant to jamming devices, which is the most common method used by thieves to bypass existing immobilisers.

The advantage of CAN data over conventional systems is that they operate silently. It isn't detected by sophisticated RF scanning and code-grabbing technologies, nor can it be recognized by conventional diagnostic tools. The Autowatch Ghost does not employ LED indicators but instead utilizes buttons on your vehicle, such as the steering wheel, centre console, or door panels, to create a a unique disarming sequence. You can make this sequence up to 20 presses long to provide additional security. The iPhone app is limited to one connection, and comes with a unique pairing code for the Ghost. All communication between the two devices is encrypted.

The Ghost will stop car thieves from putting in an ignition key that is not in use or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to start only if the correct pin code is entered. It can be temporarily operated in the Valet/Service mode (with the appropriate parameters, like 30mph speed limit) which means you can give your car to valet or service without having to enter an entry code.

Tested for each vehicle

The Autowatch Ghost is a world-first aftermarket immobiliser for CANbus. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device snoops on electronic signals to block your car's system from performing its normal startup routine until you input the passcode you have created. The system can be turned on or off through your smartphone's app without the need for extra wires.

Standard factory immobilisers for vehicles function by using a transponder built into the key that transmits a signal to the ECU. If the correct code is transmitted the car will start however if the transponder is swapped with one from a different vehicle, the immobiliser cannot recognize it. This allows the vehicle to be stolen and then started. The Ghost immobiliser was developed by an South African company at the top of security systems for vehicles technology. It shields your car from key cloning, hacking and even key theft. Only by physically towing your vehicle away from thieves could they steal it, and they would still not be able to drive it.

Ghost uses the buttons in your vehicle, including the indicator stalk along with the steering wheel, indicator stalk and Ghost Immobiliser Problems door panels to create a unique PIN sequence that can be changed that must be entered prior to you can drive. This is performed without the need for additional hardware like a key-fob and can last up to 20 presses long. It is also inaccessible to diagnostics equipment and doesn't transmit radio frequency signals so thieves are unable to use sophisticated RF scanning or code-grabbing technology to determine if a security system has been installed.

Ghost is more difficult to get rid of than car alarms, which require disarming by pressing several buttons. This makes it an excellent complement to a GPS tracker, which can help locate your vehicle after it has been taken.

Override of emergency PIN code

You don't have to look very far on social media to find stories or videos about cars that have been stolen with the most advanced technology tools. This includes key-cloning and hacking tools that allow them to start your vehicle without your original key fobs.

The Ghost immobiliser was specifically designed to prevent this and provide you with an additional layer of security to prevent your vehicle from being targeted by thieves. It generates a unique pin code by pushing the buttons on your steering wheel, door panel and the centre console. This unique PIN is entered alongside your original key fob to stop the engine from getting started. The unique override PIN is on the black card that you will receive after installation and is easy to remember since there aren't any LEDs.

The device is hidden in the vehicle's wiring and doesn't emit radio signals. Therefore, it cannot be detected using diagnostic software which can identify the security system you have installed. This makes it a great alternative to an alarm.

Unlike most other security systems that have an engine relay bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable the vehicle completely through a digital block of commands to both the ECU and the engine.

They can also be connected to a separate analogue alarm immobiliser or tracker. This should be decided prior to the installation. They are also service/valet mode-compatible and a good alternative to a tracker when you have your car checked for repairs to an electrical issue at the dealer.

Service/Valet Mode

In recent times there has been an rise in the number of vehicles stolen without the owner's keys. It is easier than ever before to steal your pride & joy thanks to the availability of key cloning devices and door lock picks. We've developed the Autowatch Ghost Immobiliser to combat this. It prevents your car from being driven, even if you keys have been copied.

It directly communicates with your car's ECU (Engine Control Unit), via the data loop of CAN. It's completely quiet since it doesn't use radio frequency or a key fob. It isn't detected by diagnostics or any other hacking device. It also prevents the user from using a new ECU or key to bypass the system because only the PIN number allows the engine to be started.

The device is hidden within your car using existing buttons on the steering wheel, centre console and door panels. A unique and changeable PIN code sequence of up to 20 digits has to be entered before you can start your car.

This is the first aftermarket CAN bus immobiliser that was developed. It will prevent your vehicle from being started or driven if you don't enter a PIN code before entering. If the device is in armed and you attempt to drive away, it will display a warning on your dash, which will flash regularly for around 300m. If you type in your PIN code at this point, it will deactivate the anti-hijack and your car will continue to drive as normal. If you don't enter your PIN at this time, the indicator will continue to flash and require a new PIN each time you attempt to start your car.