Double Glazed Window Repair

Most double glazed windows come with a warranty, and it's worth checking what this covers. It generally covers any problems with the window hardware including hinges and locking mechanisms within the first 10 years.

A crack in the seal is usually the cause of mist between your glass windows. This needs to be repaired immediately to avoid mould or damp forming within your home.

Condensation Between the Windows

If you notice condensation appearing between your windows, it is an indication that the seal in the insulating gases has failed. This is a serious problem that should be addressed promptly, especially in winter, when humidity levels are at their highest. This could also cause damage to sills and sealants, as well as mould.

Double-glazed windows should not have condensation between the panes. This problem can be caused by high humidity or a very cold snap. This problem is usually resolvable without the need to replace an entire window. A professional can drill tiny holes in the window and spray a special cleaning solution inside. The moisture is then removed from the window. An anti-fogger is fitted to prevent future moisture buildup.

Condensation between windows can also occur due to air leakage, or other factors outside of the window. In this instance it could take longer for the moisture inside the window to accumulate, because the air must be sufficiently warm to vaporise the water molecules. In these situations, it is better to replace double-glazed windows instead of trying to repair the sealed units.

A double-glazed window is made up of three or more pieces of insulated glass held together by a metal frame. The gap in the middle of the window is filled with a non-toxic insulating gas like argon or krypton, and then sealed. The seal prevents the gas that is insulating from escape and also prevents air and moisture from entering into the gap.

As windows age, seals can be damaged, allowing moisture to enter between the glass panes. It is crucial to recognize when the seals are leaking because it indicates that the double glazing isn't functioning as efficiently as it used to. This could result in lower energy efficiency, higher heating bills, damaged property and the risk of condensation between the windows.

Mist

It is normal to observe condensation on your windows. This means that your double glazing system is working correctly and is able to maintain warm in your home. The condensation happens because the outside air is hotter than the glass, and it reaches the dew point of the window prior to the air inside. This is one of the great advantages of having high quality double glazing.

If you see condensation on the inside of the window, this could be a sign of an issue with ventilation in your home. This is because the extra moisture has no place to go and ends up on your window, in carpets, in furniture, and in other areas in your home. This can be avoided by having it checked out by a professional and ensuring that there is plenty of fresh air in your home.

Another reason for mist to appear on double-glazed windows is because the seal between two panes of glass has been broken. This could be due to wear and tear, or due to the use of chemical cleaning solutions. If this happens the best solution is to repair the windows as soon as possible.

Repairing your windows professionally will ensure that they remain clear of fog free of condensation, and free of misting. It's also cheaper than replacing them entirely and will also help you save money on your energy bills.

A FENSA certified window installer can provide you with a cost estimate for repair or replacement of your double glazed windows. Upgrade your windows to energy-efficient A-rated ones if they are very old.

It is a very good idea to keep copies of any warranties and agreements with your window fitters. This can be extremely helpful should any issues with the windows arise in the future, and you are able to then contact your installers to resolve the issue. This is better than ignoring the issue which could cause additional problems in your home.

Close or open with difficulty

If double-glazed windows are difficult to open and close it isn't just annoying but it could also result in increased energy bills due to heat loss and draughts. It can also pose security risk, particularly when the locks aren't working properly. It is essential to fix any issues with double glazed windows and doors when you spot them.

If you can't open your window and you've tried the simplest solution such as using a screwdriver to pry it open or tapping around the frame with a tough object, then the problem could be more serious. It could be that the window has moved in its frame and needs to be re-set or there is gaps between the glass panes and the frames. In either case, consult a double-glazing repair specialist to ensure the repairs are completed correctly and to prevent any further problems.

It's not uncommon for upvc windows repair near me window handles and lock mechanisms to get stuck or difficult to operate, especially when they are worn and old. This is caused by an accumulation of dirt or grease within the handle. This can be cured by cleaning it using a uPVC cleaner. If this doesn't work, you could try tapping the upvc windows repairs near Me using the help of a screwdriver. Be careful not to harm the handle or the window handle mechanism.

If this doesn't resolve the problem then the window may need to be replaced, as it is likely that the hinges are no longer in the correct position, or the locking mechanisms are damaged. In this situation you should speak to a UPVC window specialist.

David The Window Wizard specialises in all technical aspects of double glazed window and door repair, including fixing a jammed or shut double glass window. He has plenty of experience in converting old window mechanisms into modern. This can save you money on replacing the entire window. Contact us now for more information or a free quote.

Warping

Double-glazed windows are usually a great option for saving energy at home. They consist of two panes that have a spacer or dense gas between them. This creates a seal which keeps cold air out and warm air inside. In time, however windows can become damaged or broken and require repair. The majority of these repairs can be made without replacing the entire window.

One common problem that double-glazed windows face is warping. This happens when windows start to bow, bend or twist, which can alter the strength of the window as well as its insulation capabilities. The best way to avoid this issue is to ensure that your double-glazed windows are properly installed and maintained regularly.

If your double glazed windows are starting to crack, it's important to contact a specialist immediately to stop the problem from getting worse. They will be able inspect your windows to identify the root cause. They will then employ special tools to correct the issue and make sure that your windows are completely sealed again.

The most common cause of this issue is water vapour that is trapped between the windows, which can get accumulated over time. It can be caused by various factors including humidity, weather conditions and temperature fluctuations. To address this issue the expert will drill out a small hole to release moisture. Then, they will use an agent to clean the glass and then apply an adhesive to protect it from moisture in the future.

If your windows cannot be shut or opened it could be due to a broken mechanism or hinges. It is advisable to lubricate these parts of the window prior to calling in a professional, as this can often solve the issue and reduce the need for replacements. However, if your windows are very old or do not provide the insulation you'd like to have it is usually better to replace them.