Window Repairs

Window repairs can help homeowners save money and maintain their comfort. Window replacement is often required in the event of severe damage like broken glass or a broken window frame.

But there are many other issues that can be repaired to extend the lifespan of your windows. Common issues include:

Cracked or broken panes

If it's an unintentional rock being tossed by your lawnmowers, or a tree's branch blown by high winds, damaged window glass is not only unattractive but can lead to higher electric bills since the broken pieces allow cold air into your home. It's relatively easy to repair windows that have broken panes.

Begin by carefully removing the glass using gloves and safety glasses. You may have to use an utility knife to break loose the old glazing compound or putty around the frame's edges. Next, use a soft cloth or paper towel to clean the surface of the glass and wood of the frame.

After cleaning the area, apply silicone caulking that is water-proof around the frame's perimeter. This will prevent water from entering the frame through the crack and cause further damage.

A bad crack in double glazed window Repairs near Me-paned glass could cause gas to leak between the panes, rendering your windows less insulative. If the crack is serious enough to threaten the quality of the glass or in the case of an inner pane completely missing, it might be time to call in an expert.

Cracks in the glass caused by thermal stress may occur when there is a drastic difference in temperature both inside and outside your home. This causes the glass to expand and contract. If the cracks are located on two sides of a window, it is recommended to replace it instead of try to repair it.

For windows that have cracked but aren't yet ready to be replaced, clear tape can do a decent job of stabilizing the crack and preventing bugs from entering cold air. You can cut an area of nylon stocking or tarp large enough to cover the crack and glue it in place with duct tape. This isn't a long-term solution, but it works well in a pinch and keeps insects and cold air away from your home. If you notice cracks on your windows that are older it is recommended to contact the local company to determine if replacing the whole window is the best option.

Rotten Wood

Wood rot is a common problem for windows. It can ruin the appearance of a home and it can also pose an hazard to safety. However, it is possible to repair rotted wood. The first step is to ensure that the source of the rot has been dealt with. Examine for leaks in the roof and other areas that water may get into the wood.

Next, you will need to take out any rotten parts of the window frame. This can be done using the use of a chisel, rasp or claw hammer. After the rotten areas have been removed then you must replace them with new wood. It is recommended to choose treated wood for this project since it will be resistant to rot. If you are unable replace the wood damaged by rot then you can use wood hardener or filler to strengthen the damaged area. This kind of product can be found in a lot of hardware stores. Follow the directions on the label of the product to ensure the most efficient results.

After you have repaired the damaged areas of the window sill, it is essential to safeguard the area. Apply a water-resistant sealant to the wood. Sikkens for instance is a fantastic product to use.

Use a two-part epoxy to protect the wood against further damage. It is simple to apply and provides a good finish. It is crucial to follow the instructions on the label. Once the epoxy filler has dried, you can sand down the surface of the wooden. It is best to start with a rough layer of sandpaper before moving to a smoother one.

You don't want to expose your rotted part to more moisture. So, it's recommended to cover the repaired area with an oil-based primer which will help protect it from moisture. After that, you are able to apply the wood sealant, which is waterproof.

The W won't let you open

A window that won't open can be caused by various reasons. The house may have settled, or the wood frames could have warped during humid weather. Somebody may have secured them with a nail for security. With a bit of patience and the right tools you can open the majority of stuck windows.

One of the main causes of a window repair that isn't able to open is the accumulation of debris or gunk on its moving parts. Acme Glass notes that dirt and grime accumulates over time on sliding tracks, hinges, and locks. In addition, metal hardware is prone to be rusty when it comes in contact with humidity and direct sunlight. Spray grease on these areas can aid in preventing oxidation and keep your windows functioning well.

The pulleys used to raise or lower the window could become loose, or even break. The components may lose tension and cause obstruction when they are placed two or more floors above the surface.

If you have trouble opening a door, you can use a pry-bar to gently open the door. Put a piece of wood on the frame to give the pry bar more leverage, and be sure not to harm the window or wood. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood, making it easier to move.

Another common problem for windows that aren't opening is a faulty spring that prevents the window jamb from rising or lowering. Based on the manufacturer of the windows, you'll have to consult the manual of your owner for additional instructions.

If you've tried cleaning and lubricating the moving parts on your windows, but they cannot open, it's time to replace windows. Homespire Windows & Doors provides windows that are energy efficient. Don't let your windows slide from functional to inoperable since a window that isn't properly shut could leave your home vulnerable to burglary and water damage. Contact us to learn more about our windows replacement and services today!