Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to take the time to make sure that you're doing everything you can to ensure that your windows are in good shape.

For single pane windows it is relatively easy to replace them, and the replacement will generally fit within the old frame very easily. If windows with double panes are held together by internal beading, it is more difficult to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

If you plan attempt to remove the window panes by yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not on the floor which could cause them to be trampled under.

It's a great idea tape the gap once the glass is removed. This will stop drafts and water from entering your property until a professional comes out to fix the window. This also serves as a barrier to prevent any criminals from getting into your home. If the gap between the window and the door is large, you might prefer an alarm system that has an opening. This will give you the best of both.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows with sash. However, with time, they are susceptible to a range of problems including sliding. A sagging uPVC window can cause problems with light, Upvc door repairs near me draughts and even security. If you find that your uPVC window repair near me is beginning to shrink, it's important to act quickly to prevent the problem from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows to access the frame. Then, you can remove the top and bottom hinges using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in position.

If you are unable to reposition the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, upvc door Repairs near me leading them to loose their elasticity. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows are waterproof and safe from drafts.

uPVC handles may also loosen up. Most often this is due to screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close your window and do a test to ensure that it fits. The corner joints of the sash must align with the casing joint. If it isn't then you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

It is essential to take action if wake up every morning to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on how severe the issue is, old caulking may need to be removed. When it is time to uPVC repair, you must avoid 'over-caulking'. This can make your window more difficult to clean and lower its energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with a breeze it could be hinges at fault. These are easily replaced by any competent DIYer and can be done within a few minutes.

Like all mechanical parts hinges are prone to be damaged over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is easier with someone else to help you hold the frame in place.

Check that the Upvc door Repairs Near me hinges open and close in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused due to opening the window in the wrong way or due to a poor installation at the factory. This issue can be fixed by sending us a photograph via our website and we will be pleased to offer you advice.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant on the hinges is an ideal way to do this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the chance of windows getting stuck and stop corrosion. Ideally, you should perform this every year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few different things. The hinges can also be misaligned due to wear, which can cause gaps where the sash meets frame. If they are beyond repair, it could be necessary to have them realigned. The second is the interlock, which is on the hinge side of the window and can also be misaligned, and again it may be possible to give them a thorough clean, however in some cases it might be necessary to have these replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce draughts.

One of the most effective methods to reduce drafts is to use a draught excluder. These are usually fabric tubes that are filled with some type of filler. They can be put on the windowsill on top. They can help keep cold air out and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is crucial to keep in mind that all windows eventually wear out and it is more cost-effective to simply replace them rather than repair them. If you have any problems with your upvc window you should consult a professional as soon as you can.