Repairs to uPVC Windows

upvc window repair near me is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good condition.

For single pane windows it is relatively easy to replace them, and the new window will generally fit within the old frame very easily. However If you have double-pane windows that are held in place by internal beading, it will be more difficult to take out the old panes and put in new ones. In this situation, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass by yourself. It is also a good idea to lay down a drop cloth prior to when you start working on the glass to ensure that any fragments of glass fall onto the fabric instead of onto the floor where they can be trodden under and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and repair the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you may be interested in a security door that has an integrated window repairs as it offers the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. However, with time, they are susceptible to a range of issues, including sagging. A window that is sagging can cause problems with light, draughts or even security. It's crucial to act when you discover that your uPVC windows are sliding.

To repair a window repair near me that is sagging, you can try repositioning the hinges. First, you'll need to unblock the windows to get at the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in the right place.

If you can't reposition the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to loosen. If this happens, it's important to replace the seal as soon as possible to ensure your uPVC windows are watertight and draught-proof.

UPVC handles can also become loose. This is often caused by screws that have been removed over time, but it could also be due to the handle mechanism wearing out. It's fairly simple to fix a loose uPVC handle. First, you'll need to close the window and perform an experiment to ensure that it fits. The joint at the corners of the sash must align with the joint on the casing. If it does not you can use a screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it is important that you take action. Water leaks from windows not only lead to the degradation of your home's structure but also hinder your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by any DIYer who is competent. Depending on how severe the issue is, old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and can decrease the efficiency of your energy usage.

Make sure that the drainage holes are free of debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you may have to replace the window.

Mold spots and rotted sills are another sign of water leakage. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is with the seal rather than the frame. Again this can easily be repaired by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open with a breeze, it may be hinges that are at the fault. They can be easily repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. It's easy to change the hinges on a window but it's much easier if someone else helps you hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. You can check this by looking for the arrows on each hinge. This indicates which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a particular way or due to inadequate installation at the factory. This issue can be fixed by sending us a picture through our website and we will be more than happy to give you suggestions.

It is also important to grease the hinges on a regular basis. Applying a light engineering lubricant on the hinges is an ideal method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. The ideal time to perform this every year. WD40 and other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few different things. The hinges may also become misaligned due to wear, causing a gap between the frame and sash. If they are damaged beyond repair, it could be necessary to have them realigned. Second, the interlock can also become unbalanced. This is located on the hinge's side and might require to be cleaned. In some cases it might be necessary to replace them.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and again will lessen the possibility of draughts.

Lastly, one of the most effective methods to reduce drafts is to use a draught excluder. These are typically made of fabric that are filled with some kind of filler. They can be positioned on top of your windowsill. They can help stop cold air from entering and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows eventually wear out and it is cheaper to replace them instead of fixing them. So, if you are experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional as soon as possible.