Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. It is crucial to take the time to make sure that you're doing all you can to keep your windows in good shape.

For single pane windows, it is relatively easy to replace them, and the replacement is usually able to fit into the old frame very easily. However when you have double pane windows that are anchored by internal beading, it'll be more difficult to remove the old panes and put in new ones. In this case it is essential to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor and could be trampled.

Once the glass is removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and fix the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window, since it offers the best of both worlds.

2. Sagging

upvc window repair windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. In time, they could develop a variety of issues, including sliding. A sagging window in uPVC can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from worsening.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll have to open the window so that you can get to the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or Sash counter-clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the fit, tighten the screws to ensure that they stay in position.

If you are unable to move the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to loose their elasticity. If this happens, it's important to replace the seal as fast as possible so that your uPVC windows remain watertight and draught-proof.

UPVC handles can also become loose. This is usually due to screws that have been removed over time, but it can be due to the mechanism of the handle wears out. It's relatively simple to fix a loose uPVC handle. The first step is to close your window and do a test to ensure that it fits. The joints at the corners of the sash must align with the joint on the casing. If it does not you can use a screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it's important to take action. The leaks of water from windows do are not just a cause for degradation of your home's structure but also hamper your efforts to control the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is either damaged or missing.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on how serious the issue is, old caulking might need to be removed. When it comes to uPVC repair, it is important to avoid over-caulking. This can make your window repairs near me harder to clean and decrease its energy efficiency.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to note that if the leak originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. Again this can easily be corrected by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with a breeze it could be hinges that are at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like all mechanical parts, hinges can wear out over time. Changing a window hinge is essentially a simple procedure, but it is simpler when you have a person to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a particular way or due to improper installation in the factory. Sending us a picture via our website is often enough to solve the issue. We are happy to give suggestions.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window open and close more easily. It can also prevent corrosion and reduce the risk of sticking. The ideal time to perform this every year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again because of wear and tear, could become misaligned. This can cause gaps to develop where the sash meets the frame. This can be easily repaired by giving them thorough clean, however if they are beyond repair it might be necessary to get them realigned or replaced. The interlock may also become disaligned. It is located on the hinge side and may need to be cleaned. In some instances, it may be necessary to replace the hinges.

These seals can wear down or get damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen the risk of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. These will help to block out cold air and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security to your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually wear out and it could be cheaper to replace them instead of fixing them. So, if you're experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.